The following LEDs and interfaces are shown at front and rear panel of VHMP-25BD

Product Detail :

Key Specifications/Special Features: Product Name: VHMP-25BD Material: Aluminum Color : Gray Interface : USB2.0 System requirements : Support all operate systems CHIP: ESS6425 Files Type : Standard FAT 12/16/32,NTFS Can Play Type: MPEG-4(AVI.DivX,XviD),MPEG-2(AVI,VOB),MPEG-1(AVI,MPG,DAT) Data transfer speed: Full Speed up to 480M/S Suitable HDD: For 2.5 inch HDD HDD Capacity: 120G or higher Power supply: AC Input:100-240VAC DC Output: +5V, 1A

2.5"HDD Multimedia Player

VHMP-25BD

Accessories:

The Y (Green), Pb (Blue), Pr (Red) RCA cable is progressive scan output for TV set. In case, the Main Menu is not appeared after connecting YPbPr cable, press TV-OUT button until you see the main menu. SETUP MENU Setting: Select TV output to YPBPR Note: TV-OUT button can be pressed only at Main Menu but not any other Menu. (4)Connect to a TV set, through Video Component-YCbCr

(1) Infrared Remote Control (3 Volt CR2025 Lithium battery included)
(2) A/V Cable (Composite RCA and Audio L/R RCA)
(3)~(5) Multi-Video Cables (S-Video Cable, Component-YPbPr Cable , VGA Cable)
(6) USB 2.0 High Speed Cable (A to mini B)
(7) USB Driver CD for Windows 98/SE
(8) External Power Adapter

Introduction:
MP3 Music Player and Music Jukebox Save your music sound files on VHMP-25BD and enjoy music through TV speaker or existing audio device. It can store and play back MP3, WAV, AC3 and WMA music files about maximum 50,000 songs if installed a 100GB HDD.

Digital Photo Album Use VHMP-25BD to share thousands of your digital photos which are high resolution image with your family or friends. You can also enjoy a photo slideshow in a big TV screen at home or demo some photos for commercial purpose. Support photo files with BMP, JPG, JPEG, motion JPG (15fps/30fps).

Data Storage Box Backup all files on VHMP-25BD and use it as a portable external disk drive and storage device. This could be done through USB 2.0 interface at high speed 480Mbps and transfer all data from PCs or Mac.

Firmware Update You can download latest updated features via firmware upgrade. Please contact with you local dealer or importer for latest firmware.

Powerful Media Processor The heart of VHMP-25BD device is a powerful media processor supporting the demanding MPEG-4, MPEG-2, MPEG-1, DivX and XviD decoding.

Comprehensive Graphic User Interface (GUI) Menu HA-258MP is designed with comprehensive graphic user interface menu to make the operation more user- friendly while media playback.

USB 2.0 High Speed Data Transfer Support USB 2.0 with maximum data transfer rate 480Mbps.

Top and Side View: Brushed high-quality aluminum top cover Plastic enclosure, Case dimension is 86 x 146 x 23mm (WxLxH)

Front Panel View:
(1) PWR LED -- Power LED Green color at power-on mode and Red color at standby mode.
(2) IR LED –-- Infrared Remote Control LED Red blinking color whenever the remote control signal is received
(3) IR Receiver --- Infrared Remote Control sensor The sensor window of the remote control Rear Panel View:
(5) DC 5V --– DC input Connect to provide 5V power adapter for TV Play mode or PC mode.
(6) USB –-- USB port Connect to PC or Mac, USB 2.0/USB 1.1 port providing power (max. 500mA) and transferring data
(7) A/V –-- Audio/Video connector Connect to Composite (RCA) jack and Audio jack (RCA) of TV set
(8) Multi-Video --– Multiple Video connector Multi-Video connector provides more choices for TV set connection, including S-Video, Component-YPbPr/YCbCr and VGA output.

Connect VHMP-25BD to TV set:

(1)Connect to a TV set,Video Composite (RCA)

The Y (Green), Cb (Blue), Cr (Red) RCA cable is progressive scan output for TV set. In case, the Main Menu is not appeared after connecting YPbPr cable, press TV-OUT button until you see the main menu. SETUP MENU Setting: Select TV output to Y CBCR Note: TV-OUT button can be pressed only at Main Menu but not any other Menu. (5)Connect to Monitor or LCD Display, through Video VGA

In case, the Main Menu is not appeared after connecting YPbPr cable, press TV-OUT button until you see the main menu. SETUP MENU Setting: Select TV output to VGA Note: TV-OUT button can be pressed only at Main Menu but not any other Menu.

This is a normal connection for TV set or LCD display on car with video composite (RCA) (Yellow) output and audio stereo 2ch L (White) and R (Red) (RCA) output. SETUP MENU Setting: Select TV output to S-Video/ Composite Note: TV-OUT button can be pressed only at Main Menu but not any other Menu. (2)Connect to a TV set, through Video S-video

In case, the main menu is not appeared after connecting S-Video cable, press TV-OUT button until you see the main menu. SETUP MENU Setting: Select TV output to S-Video/ Composite Note: TV-OUT button can be pressed only at Main Menu but not any other Menu. (3)Connect to a TV set, through Video Component-YPbPr

Home        About VIV        Products        Downloads        Contact US

VIV TECHNOLOGY INC LIMITED

Welcome to VIV